Distribution Transformer

10KV oil-immersed distribution transformers

10KV Class Three Phase Oil-Immersed Distribution Transformer

  1. Rated Voltage: 10 kV (kilovolts)
  2. Frequency: 50 Hz or 60 Hz
  3. Rated Power Capacity: Usually specified in kilovolt-amperes (kVA) or megavolt-amperes (MVA)
  4. Phases: Three-phase
  5. Cooling Method: Oil-immersed cooling
  6. Insulation Class: Typically specified according to international insulation class standards (e.g., Class A, Class B, Class F, Class H)
  7. Efficiency: Usually specified as a percentage (e.g., 98%)
  8. Vector Group: Specifies the phase shift between the primary and secondary windings
  9. Winding Configuration: Typically delta-wye or wye-delta
  10. Protection: Overload protection, short-circuit protection, and other safety features
  11. Standards Compliance: Compliance with relevant international standards such as IEC, ANSI, or IEEE
Distribution transformer

20KV Class Three Phase Oil-Immersed Distribution Transformer

  1. Rated Voltage: 20 kV (kilovolts)
  2. Frequency: 50 Hz or 60 Hz
  3. Rated Power Capacity: Usually specified in kilovolt-amperes (kVA) or megavolt-amperes (MVA)
  4. Phases: Three-phase
  5. Cooling Method: Oil-immersed cooling
  6. Insulation Class: Typically specified according to international insulation class standards (e.g., Class A, Class B, Class F, Class H)
  7. Efficiency: Usually specified as a percentage (e.g., 98%)
  8. Vector Group: Specifies the phase shift between the primary and secondary windings
  9. Winding Configuration: Typically delta-wye or wye-delta
  10. Protection: Overload protection, short-circuit protection, and other safety features
  11. Standards Compliance: Compliance with relevant international standards such as IEC, ANSI, or IEEE
Distribution Transformer Table-2
Distribution Transformer

35KV Class Three Phase Oil-Immersed Distribution Transformer

  1. Rated Voltage: 35 kV (kilovolts)
  2. Frequency: 50 Hz or 60 Hz
  3. Rated Power Capacity: Usually specified in kilovolt-amperes (kVA) or megavolt-amperes (MVA)
  4. Phases: Three-phase
  5. Cooling Method: Oil-immersed cooling
  6. Insulation Class: Typically specified according to international insulation class standards (e.g., Class A, Class B, Class F, Class H)
  7. Efficiency: Usually specified as a percentage (e.g., 98%)
  8. Vector Group: Specifies the phase shift between the primary and secondary windings
  9. Winding Configuration: Typically delta-wye or wye-delta
  10. Protection: Overload protection, short-circuit protection, and other safety features
  11. Standards Compliance: Compliance with relevant international standards such as IEC, ANSI, or IEEE
Have an Inquiry